StakdTrax ENFR Download

Multi-iPhone recording

Your phones, together.
One recording.

Up to eight iPhones join a session and become one recording rig. Each phone records from where it stands, then StakdTrax lines the tracks up to within a fraction of a millisecond and stacks them into a single take.

iPhone · iOS 17 or later · Free to start · No internet needed · English and French

Arrival times before calibration
Snaresphone 2
+14.2 ms
Pipe corpsphone 3
−8.6 ms
Judge positionhost
0.0 ms
MSR 1 · Take 2

Pressing record on eight phones at once doesn't work.

Every iPhone keeps its own time, and its own idea of how fast time passes. StakdTrax measures all three of the ways phones disagree, and corrects for each.

Clock offset
±2 ms

How far apart two phones' clocks are, even after they agree over Wi-Fi. Calibrating takes it below a millisecond.

Clock drift
18 ms

How far two phones slip apart in a ten-minute take at 30 parts per million. Measured, then corrected when the stack is built.

Sample rate
47 999.7 Hz

What a phone labelled 48 000 Hz may really record at. StakdTrax resamples each track so they stay in step to the end.

How StakdTrax keeps phones in step →

How a session goes

The host's phone runs everything. The other phones follow on their own, and the bar at the bottom of the screen always shows what to do next.

  1. Lobby

    The host starts a session. Others scan a QR code, pick an open session, or type a code.

  2. Calibrate

    Phones huddle together while the host plays a short sweep. A few seconds, and worth it every time.

  3. Record

    Everyone spreads out. The host records one or more takes; the other phones follow on their own.

  4. Collect

    Each phone sends its tracks to the host, one take at a time. No cables, no cloud.

  5. Stack

    The host lines the tracks up on one timeline and builds the stack: a mix, plus every phone's own track.

New to it? Turn on Guide me through it on the home screen and every step says what to do, with a button to do it. About guided mode

Built for the way your group records

Pick your group when you start a session. Positions, markers, file names and the report after the take all follow it. Groups are part of StakdTrax Full.

  • Pipe bands

    Pipe major · Seconds · Snares · Tenors · Bass · Judge position

    Mark the attack and each tune, run a mock-competition clock against the set's time limit, and hear the band from the judge's position.

  • Choirs

    Sopranos · Altos · Tenors · Basses · Conductor

    Mark each piece, then read the tempo, how far the choir drifted from A = 440, and each part's balance in dB.

  • Orchestras and ensembles

    Strings · Woodwinds · Brass · Percussion · Soloist

    Phones sit with their sections. Mark each movement, then check tuning, tempo and section balance.

  • Concerts, from the audience

    Front left · Middle centre · Balcony right · Backstage

    Phones take seats across the hall, so the stack hears the room the way the audience did.

  • Meetings and presentations

    Chair · Presenter · Minutes · Panellist · Questions

    Five room layouts, agenda-item marks, speaking time per position, and an on-device transcript.

  • One phone

    Record on this phone alone

    No one else around? One phone makes an ordinary take, kept and exported the same way as a stack.

What you take home

Building a stack writes everything you need to finish the recording here or somewhere else.

  • A mix of every phone, with a choice of sound, from Natural to presets suggested for your group.
  • One aligned file per phone, named by position: Snares, Altos, Balcony right. Drop them into a DAW as stems.
  • A CSV of the timing offsets, so you can line up the original recordings yourself.
  • 24-bit WAV by default, or CAF, Apple Lossless or AAC. Originals are never changed.
  • Marks for every tune, piece, movement or agenda item, made during the take or afterwards on the waveform, so you can play or share one section on its own.
  • Progress, week by week: every report set beside the ones before it, so you can see the tuning, unison and tempo improve. Tag takes to choose which ones count.
  • The stack on every phone: the host can keep the session open and send the finished stack back to the phones that recorded it.
  • Takes you can reshape: split one at its marks or around the talk between pieces, join two back together, and the stacks rebuild themselves.
  • A finished stack: share it, review each track, or change its sound
  • Reviewing one phone's track, with trim, fade, mute and level
  • Marking the next tune while recording a mock competition
  • A pipe band's progress over the weeks, counting only the takes chosen
  • Recordings, listed by day
  • A playlist of takes and marked sections
  • A meeting transcript, set out by agenda item
  • Every phone's level, timing and warnings while recording
  • Guided mode, showing step 2 of 7 in the lobby

Questions

How many iPhones can record together?

Up to eight in one session with StakdTrax Full: the host and seven more. The free version hosts two. One phone on its own works too, and makes an ordinary recording you can keep and export the same way.

Is StakdTrax free?

Yes, to download and to try. The free version records, lines up and stacks two phones, so you can hear it work. StakdTrax Full is one purchase, made once and shared through Family Sharing. It adds sessions of up to eight phones, the groups with their marks and reports, every sound, full-quality files, playlists and Map the room. Only the phone that hosts needs it: phones that join need nothing.

Can I see my group improving?

Yes. Progress sets each report beside the ones before it, week by week: tuning, unison, tempo and balance. Tag takes, such as Practice or Competition, to choose which ones count.

Do I need an internet connection or Wi-Fi network?

No. The phones connect to each other directly over Wi-Fi, usually in a second or two, so a church hall, a field or a basement rehearsal room is fine. Wi-Fi only has to be switched on, not joined to anything.

What if a phone is too far from the host?

It keeps recording whatever happens. During a take it holds its link through a brief drop, and comes back by itself when it loses it. A phone that can't reach the host links through another phone that can. If it was away for several takes, the host cuts its long track to fit the takes recorded meanwhile.

How closely do the recordings line up?

To within a fraction of a millisecond when you calibrate. Calibrating takes a few seconds: the phones are held together while the host plays a short sweep, then everyone spreads out to record.

Can I use the tracks in a DAW?

Yes. Building a stack writes a mix of every phone, one aligned file per phone, and a CSV of the timing offsets. Files are 24-bit WAV by default, with CAF, Apple Lossless and AAC as options, and they appear in the Files app.

Does it work on Android?

No. StakdTrax is for iPhone, on iOS 17 or later. Every phone in a session needs StakdTrax installed.

Are meeting transcripts sent anywhere?

No. On iOS 26 or later, StakdTrax transcribes a meeting on the iPhone itself. Nothing is uploaded; the speech model downloads once, the first time.

Record your next rehearsal from every side.

Install StakdTrax on each phone, name them, and start a session. Try it alone first: the home screen records five seconds and plays it straight back.

Download on the App Store

Support the band

If StakdTrax helps your group, consider giving to Greighlan Crossing Pipe Band. Donations go to the band's PayPal fundraiser, through the District 5050 Pipe Band Society.

Donate to Greighlan Crossing Pipe Band