StakdTrax ENFR Download

Pipe band mode

Positions, tune markers and time limits for pipe bands.

Pipe band mode is for recording a Highland pipe band, whether for practice, a mock competition or a performance. Each phone takes a position in the band. Anyone can mark the attack and each tune while recording, and during a mock competition a clock counts down to the set's time limit. Any phone can host. It's part of StakdTrax Full: the host needs it, the phones that join don't.

Turn it on

Start a session with Group set to Pipe band
Start a session with Group set to Pipe band

When you tap Start a session, set Group to Pipe band, then choose:

  • Session — Practice, Mock competition or Performance.
  • Set — the set the band is playing, or No set.

Your choices are remembered for the next session. To start every session in pipe band mode, set Start sessions as to Pipe band in Settings › Groups. Settings › Groups › Pipe band is where you enter the band's name and grade.

The host can change the session type and set in the lobby, and between takes on the recording screen.

Sets and tunes

In Settings › Groups › Pipe band › Sets and tunes, add one set for each medley or march, strathspey and reel the band plays:

  • Name — takes are named after it: MSR 1, MSR 2.
  • Tunes, in order — one per line. The tune markers use these names.
  • Time limit — shown while recording a mock competition. Check your association's rules for your grade.

Positions

In the lobby, each phone picks This phone's position: Pipe major, Pipe corps, Seconds, Snares, Tenors, Bass, Judge position or Audience. The host can change any phone's position by swiping its row and tapping Position.

A phone's recordings are named after its position, so the files read Snares, Bass, Pipe corps. If two phones share a position, the second is numbered, e.g. Snares 2. Each phone remembers its position for the next band session.

A phone at the Judge position hears the band the way the judges do, rather than from inside the circle.

Moving a phone between takes

Positions are not fixed at the start. Between takes — on the recording screen, after a take has stopped — each phone can pick a new This phone's position, and the host can move any phone by swiping its row and tapping Position. Use it when a phone turns out to have been in the wrong place, or when you deliberately move it for the next take.

The take you have already recorded keeps the names it was recorded under; the next take uses the new positions. To rename a track in a take already made, open it in Your recordings and rename it there.

The circle

The circle, with the band in place
The circle, with the band in place

The lobby and the recording screen show The circle: the band from above, with every phone standing at the position it holds. Positions nobody has taken yet are named in grey, so a gap is easy to see, and a phone with no position at all is listed underneath with Place beside it.

Tap the circle where your phone is standing to put it there. Drag a phone on the circle to another position to move it, or tap it to choose one from a list — your own phone on any phone, anybody's if you are the host. Judge position and Audience, outside the ring, are places you can drag to as well. A phone let go of well away from every position stays where it was. It is the same choice as This phone's position, and as the Position swipe on a phone's row in the lobby — or, on the recording screen between takes, the small arrows on a phone's tile — drawn the other way round.

It is a diagram of what each phone says, not a measurement: it cannot know which way the band faces or how wide the circle really is. To record where the phones actually stood, Map the room during calibration and open Where the phones were from the take in Your recordings.

Whether or not you mapped the room, a band take keeps where each phone said it was standing. Where the phones were draws that circle from above, with a list of who stood where; if the room was mapped, it draws the measured layout instead. Takes recorded before StakdTrax wrote positions down are placed from the position names on their tracks, and any track you have renamed is left off the circle rather than placed wrongly.

Where the phones were, in a finished band take
Where the phones were, in a finished band take

Indoors

Indoors is part of the session, not of one phone: the host turns it on in the Start a session sheet, or from the band section once the session is running, and every phone follows.

A hall changes two things:

  • Phones warn about their level sooner. Outside, a phone says Loud within 6 dB of clipping. Indoors it says so within 12 dB, because a level set while the pipes tune — in a room the band has not filled yet — is several decibels below what the same phone sees once everyone is playing. The advice changes too: indoors, height helps where standing further back does not.
  • Stacks are built with Full band, indoors. The stack screen offers it, and a take recorded indoors starts on it when you rebuild from Your recordings. See Choosing a sound.

A phone cannot be turned down. The microphone in an iPhone has no gain control — see Settings — so if a phone clips indoors, move it back or put it above the band.

Mark the attack and each tune

Recording a mock competition, the attack marked
Recording a mock competition, the attack marked

While recording, the band section shows a big button.

  • Tap Attack as the drums roll in. It's named after the set's first tune.
  • Tap Next tune as each tune starts.

Any phone can tap. Every phone shows the same list of tunes, with the time each one started. If two phones tap within a second of each other, it counts once, and the button dims for that second.

The stack starts at the attack. The tune-up and chatter before it are left out of the stack and the per-phone files, but kept in the original recordings.

If the attack was tapped late, or you want the tune-up as well, turn off Start at the attack before you build. It's under Sound, on the stack screen and in Your recordings, and says how far into the take the attack was marked. A built stack says where it starts, and a rebuild starts in the same place.

Tunes, after the recording

Open the take in Your recordings. Under Tunes, each marked tune shows when it starts and how long it runs, and its play button plays that tune from the stack.

  • Split into tunes writes each tune as its own file beside the stack. It's there once two or more tunes are marked.
  • Compare takes plays the same tune from this take and then from another take of it, so you can hear which was better.
  • Band pack bundles the take into one zip: the stack, each phone's file, the tune files, the offsets, and a note listing the band, the set, the tunes and their times. Share it however you like — one file rather than a dozen attachments.

Tunes come from the marks, so a take nobody marked has none. Rebuilding the stack keeps the marks and works the tunes out again. A missed or late mark can be put right afterwards in Review & edit tracks: see Marking tunes afterwards.

Tuning and tempo

Open a band take in Your recordings and tap Tuning and tempo. StakdTrax listens back to the stack and reports, tune by tune — or, for a take with no tunes marked, three minutes at a time to the end of the take (Take 1, 0:00–3:00, Take 1, 3:00–6:00 and so on). While it measures, a bar shows how far it has got, which tune it is on, how long it has been going, about how long is left and what it is listening for; Cancel stops it and keeps any earlier report. It carries on if you leave the screen: a banner across the top of every screen shows how far it has got, says when the report is ready, and opens it when tapped. Ask for another take's report while one is measuring and it waits its turn. It reports:

  • Low A — where the chanters sat, and how far the tenor drones were from a true octave above the bass. Under about 5 cents and nothing beats audibly.
  • Each tune — its pulse in beats a minute, and how far apart the corps sat on the notes it held, in cents.

Where a tune shows two tempos, such as 148 BPM, or 74, both describe the same playing: a tune counted at one beat or at two is the same music, and nothing in the sound says which you count. Take whichever matches how the band counts it.

A march and the reel after it read at different tempos, which is the point: the tune is the unit worth asking about. Everything is measured from the built stack, so build it first, and mark the tunes while recording to get a reading per tune.

Two lists of tempos go with it. Tempos, at the top, gives every tune's tempo together, in the order they were played. Under each tune, its tempo every 12 seconds shows where it sped up or dragged, counted the same way as the tune. Tap a time to hear the stack from there to the end of the tune, with the whole tune on the timeline under it so you can scrub back or on; tap it again to stop. Choose which you see in Settings › Groups › Pipe band › Tempo list: For the set, Through each tune, or Both. A report measured before this list existed says Measure again for it.

It reports what it measured and leaves the judgement to you. Where nobody was playing it says so rather than inventing a number.

The reading is kept. Measuring takes a few minutes on a phone, so the result stays with the take: the screen opens on what it said last time, with the date underneath, and two takes can be compared without either being measured again. Tap Measure again for a fresh reading.

If you build the take's stack again — a different sound, an edit, a track left out — the screen says the reading came from the stack before that one. Measure again for the take as it is now.

Time limit

In a Mock competition with a set that has a time limit, the band section shows the time since the attack against the limit. It turns orange in the last 30 seconds and red once you're over.

Too loud

Pipes are loud close up. If a phone's microphone is close to clipping, its row says Loud — close to clipping. Once it clips, the row says Clipping — move this phone back. Move that phone further from the band before recording. This check works in every session, not only in pipe band mode.

With Indoors on, a phone says Loud for a hall at twice that distance from clipping, and the advice becomes move this phone back, or higher — see Indoors. Nothing turns the microphone itself down: an iPhone has no input gain to set.

The sound

For a band's stack, try the Pipe band sounds — see Choosing a sound.