Your recordings
Play, rename, share, edit, rebuild and make playlists.
Your three latest takes are under Recent on the home screen: tap one to open it, or its play button to hear its stack. All recordings, below them, lists every session on this phone by day — Today, Yesterday, then the date — newest first. Each session is one row: its name, an icon for its kind of group, and when, how long and how many tracks. A session of one take plays from its row and opens straight onto the take; a session of several opens onto its takes. Search, at the bottom, finds a session by its name, a take's or its group's.

Listening
- Tap the play button beside a take to hear its stack. A take that hasn't been stacked yet shows Build instead — a stack of squares where the play button will be.
- A session with several takes has a play button too: it plays every take's stack in the order they were recorded, one after another, and says which one it is on. Play all takes is also at the top of the session's list of takes and in the menu you get by touching and holding the session. A take not stacked yet is skipped.
- Tap a take to open it: its stack, with every phone's track underneath.
- Turn on Apply edits to hear the tracks with your trims and mutes, or leave it off to hear them exactly as recorded.
Whatever is playing gets a timeline under its row: how far it has got, how much is left, and marks along the way. Drag it to scan through the recording, or tap anywhere on it to jump there. VoiceOver reads it as a slider that moves five seconds at a step.
For a band take, each tune's own row has the same timeline, covering that tune rather than the whole stack — so scanning stays inside the tune you are listening to.
To scan by looking at the sound rather than the clock, open Review & edit tracks, where each track is drawn as a waveform you can tap — see Review and edit.
Rename, share and delete
- Swipe right on a session, a take or a track to rename it. Exported files are renamed to match; the original recordings keep their names. A session with one take is renamed from its swipe; to rename that take, touch and hold it and choose Rename.
- Swipe left to delete a take, or a single phone's track. Swiping left on a session in the list deletes the session. The takes after a deleted take move down a number, so there's no gap; their files stay where they are. A take can't be deleted while a stack is being built.
- To delete a whole session, or to Keep forever, touch and hold its row. A kept session shows a badge beside it, and is skipped by bulk cleanup by age however old it gets — nothing else about it changes, and deleting it one at a time still works exactly as it always has.
- Share the stack sends the stack file anywhere — AirDrop, Messages or Files. It is inside the take, and in the menu you get by touching and holding a take.
- Add to Playlist puts a take, or one of its tunes, on a playlist — see Playlists, below.
Deleting can't be undone.
Playlists
A playlist is an ordered, named list of takes and tunes — a rehearsal's best three, or a set pulled from several sessions — that plays straight through.
Add to Playlist, on a take or a tune, asks which playlist it goes on, or starts a new one. Playlists, the button at the top right of the recordings list, opens the list of them.

Open a playlist to:
- Play all, straight through in order. Tap a row's own play button to start from there instead.
- Reorder with Edit, or swipe to remove an item. Removing an item from a playlist never deletes the recording itself.
- Export as one file bounces the whole playlist to a single file, with a moment of quiet between tracks, then Share the playlist sends it anywhere. Two items recorded at different rates or channel counts — a mono solo take and a stereo stack, say — cannot be joined this way; the export says which it left out.
A playlist points at recordings rather than holding them. Delete a take that is on one, and its row stays, greyed out and unplayable, saying so — the playlist is not silently shortened, and nothing about the recording itself is touched by being on, or taken off, a playlist.
Review and edit
Open a take and tap Review & edit tracks.


- Pick a phone's track at the top. A timeline along the bottom of the waveform says where you are in the take.
- Tracks are called by their names — in a pipe band, each phone's position. Where those differ from the phones' own names, Show phone names switches to which phone recorded each track, and back.
- Zoom to see a short stretch up close: pinch the waveform, or use the magnifying glasses under it — − and +, one to fit the waveform to what you've selected, and ↔ for the whole track again. Zoomed in, a strip below shows the whole track with what's on screen outlined; drag or tap it to move along. While a track plays, the view follows it.
- Tap the waveform to set where playing starts. A marker appears there, Play becomes Play from here, and tapping again moves it. If the track is already playing, it jumps to the new spot.
- Drag across the waveform to select part of it, then tap Mute, Lower, Restore, Trim start here, Trim end here or Keep only this, which trims both ends at once so only the selection is left. Selecting a span replaces the marker, and Play selection plays just that span. The selection is shaded, with a line at each end, and the rest of the track is drawn fainter, so what an edit will change is the part left at full strength.
- Fade in and Fade out are the soft versions of the trims. Fade in starts the track where the selection starts and brings it up from silence to full level across it; Fade out takes it down to silence across the selection and ends it there. A fade is drawn as the waveform tapering. Restore over a fade takes it away, and a trim at that end replaces it.
- Lower turns the selection down by 3, 6, 12 or 20 dB. Lower it again to go further, or tap Restore to bring it back to how it was recorded. A lowered part is drawn smaller, and selecting it shows how far down it is.
- Remove from the stack leaves a whole track out; tap it again to put the track back.
- Clear all edits starts that track over.
Edits never change the recordings. They are applied when the stack is built.
Play in Review plays the track with your edits: a muted part is silent, a lowered part is quieter, and trimmed ends are silent. Change something while it plays and you hear the change from where it had got to. A long track takes a moment to prepare after each change. A track removed from the stack still plays, so you can hear what you left out.
Split a take
If one take holds two things you want apart — two pieces played without stopping the recording — split it. In Review, tap the waveform where the second one starts, then tap Split the take here. Give the new take a name, or keep the one suggested: if the take was marked, that's the name of the next mark. Every phone's track is cut at that moment, and everything after it becomes a new take straight after this one, lined up the same way. The takes after it move up a number. Your edits go with the part they were in.
Talk between two pieces can be left out as you split. Drag across it on the waveform, then tap Split, leaving this out: what's before it stays in this take, what's after becomes the new one, and the stretch you selected is deleted from every phone's track.
A marked take shows its marks on the waveform as dashed lines with their names, so you can see where the pieces start. A marked take can be split at all its marks at once. Split at the marks cuts it at every mark after the first, and each piece becomes a take named after its mark — a set becomes one take per tune. The tune-up before the first mark stays with the first tune.
Marking tunes afterwards
A take from a session run as a band, choir, orchestra, concert or meeting can have its marks put down or put right here, after the recording: a tune nobody tapped for, a mark tapped late, or a take nobody marked at all.
- Tap the waveform where the tune begins, then tap Mark a tune here. It's named after the next tune in the set that no mark is called yet; type another name if you like. With a selection, the mark goes at its start.
- Tunes lists the take's marks. Choose one to go to it, rename it, move it to the marker, or delete it.
- A mark goes on every track at once, and two marks need at least a second between them. The first mark is the attack: the stack starts there.
- Changing the marks makes the stack out of date, since its tunes, and where it starts, came from the old ones. Rebuild it to bring them up to date.
In the other modes the button and the list say piece, movement or item. Marks can't be changed in a session that's still running, or while the take's stack is being built.
Unlike an edit, a split changes the recordings: each one is cut into separate files. If the take had a stack, every take the split made has its stack built again straight away, one after another, with the same sound and start — the banner at the top shows how far each has got. A take that had no stack is left for you to build. Once it's split, Review with the new take's name takes you straight to it. A tune in a playlist follows the split to its new take, and plays again once that take's stack is built. Split is only in Review opened from Recordings, not during a session.
Join two takes
A split in the wrong place can be undone. Touch and hold the first of the two takes, or open it, and choose Join with the next take. Every phone's track is put back together as one, with your edits, and the takes after them move back down. Only takes that were recorded as one can be joined. If either take had a stack, the joined take's stack is built again straight away.
Rebuild the stack
After you edit, a stack you built earlier still has the old edits in it, and the take says edited since it was built. Rebuild the stack builds it again with your changes. It is in the take, at the bottom of Review, and in the menu you get by touching and holding a take.
A stack the host sent to your phone can't be rebuilt here: your phone has only its own track. The take says who built it — see Everyone gets the stack.
Tunes and band packs
A take recorded in pipe band mode with its tunes marked also shows Tunes: each tune's start, its length, and a play button that plays it from the stack. Split into tunes writes each one as its own file once there are two or more, Compare takes plays the same tune from two takes one after the other, and Band pack bundles everything into a single zip to share.
Change the sound
Open a take to find Sound in its Stack section. Pick one, then tap Build or Rebuild the stack — see Choosing a sound for what each does. Under Rebuild the stack, the take shows which sound its stack was built with.
Sound starts at the sound the stack was last built with. Picking one here changes only this take; new stacks still start with the sound you last chose on the stack screen. Rebuilding from Review, or from the menu on a take, keeps the sound the stack was last built with.
You hear the sound only in the stack. Playing a phone's track, here or in Review, plays it without the sound applied — with Apply edits on, you hear your edits but not the sound.
Progress

Progress, at the top of Your recordings, sets every take's report beside the ones before it, a group at a time: whether the drones are settling, the corps tightening, a march steadying, or a choir holding its pitch better through a piece.
Tap a group to see a chart for each thing measured, with a line under it saying where it has gone: Better, Worse, Holding steady, or just from one figure to another, for a figure like Low A that is a choice rather than a score. Every reading lists them all. Below the charts, each tune or piece played in more than one take has its own page, with its tempo, how steady that was through it, and how far a choir's pitch drifted.
It uses the reports already measured. Takes with a stack and no report yet are counted at the top; Measure measures them one after another, while you carry on using the app. A report is measured from the stack, so build a take before it can be measured. Groups are told apart by their kind and name in Settings, so keep the name the same from one session to the next.
Which takes count
Every measured take of a group counts, unless you choose otherwise. To keep a warm-up, or a run-through in the wind, from pulling a line about, give takes tags: open a take in Your recordings and tap Tags. Type a word or two, such as Competition or Warm-up; tags already used on other takes are offered, so they're spelled the same each time.
A group's page in Progress then lists its tags under Takes counted. Set a tag to Only these to count only the takes with it, or Left out to leave them out; Either way makes no difference. With two tags on Only these, a take with either counts, and Left out wins over Only these. With nothing chosen, every take counts, tagged or not. The list of groups says how many takes are counted, such as 2 of 4 takes, and Count every take clears the choice. Your choice is kept on this phone for the next time.