StakdTrax ENFR Download

Settings

Phone name, storage, calibration and microphone choices.

Open Settings with the gear button at the top right of the home screen — or, during a session, at the top left.

Settings
Settings

Settings is a short menu. This phone is at the top, because it is the one setting you touch every time a phone changes hands; everything else is on a screen of its own:

This phone

At the top of Settings. The name the other phones show for this one. Change it before starting or joining a session.

Guide

Settings › Sessions
Settings › Sessions

Settings › Sessions.

  • Guide me through it turns on guided mode, which walks you through a session one step at a time. The same switch is at the top of the home screen.
  • Guide style chooses how it looks: Step cards sit above the normal screens, and Step pages replace them with one page per step.

See Guided mode.

Quick start

Settings › Sessions.

The two doors on the home screen each open a sheet of choices. Once those choices stop changing, Quick start lets a door skip its sheet and do the thing.

  • Start — Ask each time (the usual) or Start straight away. Straight away hosts as soon as you tap, using the Session name below, the Open session switch here, and your pipe band, choir, orchestra or concert settings. The line under Start shows exactly what it will do.
  • Join — Ask each time, Scan a code (straight to the camera), The open session nearby, or Last session's code.

The open session nearby looks for open sessions and joins one if there is exactly one. If two turn up, or none within a few seconds, it asks instead — it will not guess between two bands in the same hall.

Last session's code rejoins with the code this phone last used, which is the quick way back in after the app has been closed. The code is shown here.

A door that no longer opens its sheet keeps a ⋯ button in its corner, so every choice is still one tap away. While guided mode is on, both doors ask as usual: the guide exists to walk through the choices a quick start skips.

See Hosting a session and Joining a session.

Default names

Settings › Sessions.

  • Session name is what a new session is called until you type another name.
  • Take name is the word takes are numbered after — "Song" gives Song 1, Song 2. The phone that hosts names the takes for everyone.
  • Track name is what this phone calls its own recordings. Leave it empty to use the phone's name.

Nothing already recorded is renamed. To rename a session's takes or tracks, use Your recordings.

Haptics

Settings › Sessions.

Say it by feel makes the phone tap when something happens that you would want to know without looking: a take opens, a take is written, a sweep is about to play, a phone joins or drops out. A phone in this app is often on a stand, in a pocket, or held by someone with both hands on an instrument. It is on by default.

Leaving a session, and anything that is only news on a screen, stay silent.

Stacks

Settings › Sessions.

Send the stack to everyone is on by default. Hosting, your phone keeps the others when you finish, until you build the stack and it reaches them. Joining, your phone takes the stack its host sends, and asks for any it missed the next time they meet. See Everyone gets the stack.

Turned off, a session ends as soon as the host finishes, and the phone neither sends nor takes stacks.

Groups

Settings › Groups.

Settings › Groups
Settings › Groups
  • Start sessions as — the kind of group every new session starts as: None, Pipe band, Choir, Orchestra, Concert or Meeting. Choosing a Group when you start a session changes it too: the choice is remembered.
  • One row for each kind of group, for its name, its programmes and its tempo list: see Pipe band mode, Choral mode, Orchestra mode, Concert mode and Meeting mode. A meeting's also chooses its room.

Appearance

Settings › Appearance.

Settings › Appearance
Settings › Appearance

The colour of buttons, links and highlights: Blue, as StakdTrax has always been, Indigo, Slate, Teal, Sage, Purple, Yellow, Orange, Red or Walnut. It changes as you tap it. In light mode, every colour but Blue also washes the background behind every screen in their colour, so the white panels stand out against it; dark mode keeps its own background.

Warnings and errors keep their own colours in every theme — orange for something worth knowing, red for something going wrong — so they still stand out. With Yellow, Orange or Red, the stretches of a track you have lowered or muted in Review are drawn in slate rather than orange, so they can still be told from the rest.

Exports

Settings › Recording & audio
Settings › Recording & audio

Settings › Recording & audio.

Stack format is what a built stack's files are written as. It applies to the mix and the per-phone stems the next time a stack is built; each phone's own recording is always kept as it was captured, in 24-bit PCM.

  • WAV — 24-bit, lossless, opens everywhere, and what a DAW wants. About 260 MB for half an hour of one channel.
  • CAF — the same audio with no four-gigabyte ceiling, for a stack hours long. Fewer apps read it.
  • Apple Lossless — the same samples in about half the space, in an .m4a.
  • AAC — 256 kbps, or 320 for a stereo stack, about a tenth of WAV. Lossy: for listening and sending, not for editing afterwards.

The free version writes every stack as AAC, low quality — 128 kbps, mono — unless the session's host has StakdTrax Full. Without Full, Stack format shows that, with a Full badge; tap it to see what Full adds. A format chosen before is kept for when you have Full. On Groups, Start sessions as shows None the same way, and each group's own settings are greyed out except the tempo list, which also applies to reports from a session whose host had Full. See Free and Full.

Changing this doesn't touch stacks already built. Build a take again from Your recordings to write it in the new format; the files from the previous build are cleared away as part of that.

Tunes written out of a band stack come from the stack itself, so a lossy stack gives lossy tunes. Build lossless if the tunes are going anywhere but a phone.

Storage

Settings › Storage.

Storage
Storage

This phone says how many sessions are on the phone and how much space they use.

Empty sessions — the Remove … empty folders button appears when there are sessions that were started but never recorded into. They hold no audio, and nothing here touches a session with recordings.

Clean up old recordings clears out real recordings by age, for a phone that has been in use for a year and has more history on it than anyone wants to pick through one session at a time.

  1. Choose Older than — a month, 3 months, 6 months, a year, or Before a date…, which shows a date to set.
  2. The button under it says how many sessions that matches and how much space they use: Delete 3 sessions · 1.2 GB. If nothing is that old it says so and can't be pressed.
  3. Tap it and confirm. Every take in those sessions, every phone's recording of it and every stack built from it is deleted.

A session marked Keep forever — see Your recordings — is never counted or deleted here, however old it gets.

There is no undo and no trash. Unlike the empty folders, these hold real audio. Check the count first — a session is deleted whole, never a take at a time. To delete one session or one take, use Your recordings.

Calibration

Settings › Recording & audio.

  • Inaudible sweep makes the calibration sweep too high for most people to hear. It is less accurate, so use it only when an audible sweep would be a problem.
  • Enter the air temperature — sound travels faster when it is warm, so a measured temperature makes distances more precise.

Recording

Settings › Recording & audio.

  • Prefer a plugged-in microphone uses an external microphone whenever one is connected.
  • Built-in microphone chooses which of the iPhone's microphones to use.
  • Channels records in mono or stereo.
  • Interface is tells StakdTrax what a two-channel interface is recording — a stereo pair, a mid-side microphone, or two unrelated sources — so the channels are combined correctly.
  • Input level sets the gain on a microphone that has one. Most don't: an iPhone's own microphones have a fixed preamp, and the row says Fixed by this microphone when there is nothing to set. Plug in an interface that does have a gain and the row becomes a picker — Leave as set, Full, or a number of decibels down.

A loud band in a hall can clip a phone, and no setting in StakdTrax turns the microphone down. Which microphone this phone listens on makes a small difference — the one facing away from the band is shaded a little by the phone itself, mostly at the frequencies that make chanters shrill — but moving the phone back, or above the band, does far more. See Pipe band mode.

Recording settings take effect the next time a session gets ready to record, not in a session already running.

Problem log

Settings › Problem log.

Every problem the Attention box has shown on this phone, newest first, with its technical details: the error itself and what the audio system was doing. It is for reporting a problem rather than reading during a session. Share sends the whole log as text; touch and hold an entry to copy just that one. The last 300 are kept, and Clear empties it without touching any recording.

About

Settings › About.

The app's version and build, Show the introduction again, and Get StakdTrax Full — or, once bought, StakdTrax Full with a tick. See Free and Full.

Under Support the band, Donate to Greighlan Crossing Pipe Band opens the band's PayPal fundraiser. Donations go through the District 5050 Pipe Band Society.