StakdTrax ENFR Download

Collecting and stacking

Gather every phone's audio and build the stack.

Collecting

When the host taps Finish and collect, each phone sends its recordings to the host, one take at a time. A half-hour take is about 260 MB per phone, so this can take several minutes.

  • The host sees overall progress, and a row for every phone's take.
  • Each other phone shows Sending, and marks its takes as sent when they arrive.
  • Keep the phones awake and nearby until everything has arrived.

If a phone's take stops coming — its row says no progress, or it has failed three times — tap Restart or Retry on that row. The phone sends that take again from the start. Bring it close to the host and keep its screen on first.

When every track is in, the host taps Continue to the stack, then builds it. If a phone can't be reached, Stop waiting goes on without it. Its recording stays on that phone, and can be shared from the Files app.

Building the stack

Stacking lines each phone's recording up on one timeline
Stacking lines each phone's recording up on one timeline

On the stack screen, the host chooses how to line the tracks up:

  • Keep the room — every phone sits where it really was, so a sound reaches the nearest phone first. Best when you will cut between phones.
  • Stack coherently — shifts each phone by its distance so the direct sound lands together. Best when you will mix them into one recording.

If the session has more than one take, pick the take first.

Down the screen: Review & edit tracks first, to listen to each phone, trim, mute a cough, or leave a track out before building. Then Build, where Build the stack has the Stereo stack switch beside it — turn that on to spread the phones across a stereo mix. Below Build is the Sound you can choose. The alignment choice and the take picker are further down still, and they apply when you tap Build the stack, so set them first.

Choosing a sound

The stack, with its Sound
The stack, with its Sound

Sound shapes how the finished mix sounds. Each choice is a gentle starting point rather than a big change. The free version builds every stack with Natural, and shows Sound with a Full badge instead of the list, unless the session's host has StakdTrax Full — see Free and Full:

  • Natural — as recorded, with no change.
  • Voice — clearer speech. Trims rumble and boominess, and lifts the range words live in.
  • Music — a gentle lift at both ends, for a fuller, more open sound.
  • Warm — rounder and softer. Takes the edge off harsh phone microphones.
  • Bright — more detail and air, for a recording that sounds dull or far away.
  • Wind & rumble — cuts wind, traffic and handling noise below about 150 Hz. For recordings made outside. For a pipe band, use Full band, windy day instead: this one also cuts the bass drone.

Pipe band

Five presets for Highland pipe bands, listed under their own heading:

  • Full band — the whole band. Adds weight to the bass drum and drones, and takes the shrill edge off the chanters.
  • Full band, indoors — the whole band in a hall. Cuts the boom hard walls add around 200 Hz and more of the chanter edge they sharpen. An indoor band session starts on this one.
  • Full band, windy day — the whole band outdoors in the wind. Cuts rumble below about 70 Hz but keeps the bass drone, and softens the chanters.
  • Pipes & drones — pipers without the drums, or a solo piper. Fuller tenor and bass drones, and a less piercing chanter.
  • Drum corps — the drum section. A deeper bass drum, less boxy tenors and snares, and crisper snare rolls.

The mix is still levelled afterwards, so no choice makes it clip. Only the mix changes: the file for each phone keeps the sound as it was recorded, ready for editing elsewhere.

StakdTrax remembers your choice for the next stack. The stack screen shows which sound a stack was built with; to try another, pick it and build again.

You hear the sound only in the built stack. Playing a phone's track, in Review or in Recordings, plays it without the sound choice.

To change the sound of a take you recorded earlier, open it in Your recordings, pick a Sound, and rebuild. Rebuilding from Review keeps the sound the stack was last built with.

What you get

Building writes, for the take:

  • a mix of every phone,
  • one aligned file per phone, and
  • a CSV of the timing offsets, so you can line the original recordings up yourself.

All of it in 24-bit WAV unless you choose otherwise — Settings › Exports › Stack format also offers CAF, Apple Lossless and AAC. See Settings.

Once it is built, tap the play button beside Listen to the stack to hear it straight away.

Building carries on if you switch to another app or lock the phone, for as long as iOS allows. Coming back to StakdTrax shows where it got to.

A stack built from Your recordings or from Review also carries on if you leave its screen. A banner across the top of every other screen shows which take is building and how far it has got, with a cross to stop it. When it is done, the banner says Stack built for a few seconds. One stack is built at a time, so Build waits until the banner has gone.

To stop a build, tap Cancel beside its progress — on the stack screen, in Review, or in Your recordings — or the cross on the banner. Nothing it wrote is kept: the stack you had before, if there was one, stays exactly as it was. A build stops within moments, except in its last instant, when the files are already being put in place; then it finishes.

The files are in the Files app under StakdTrax, and in Your recordings. The original recordings are never changed.

Everyone gets the stack

When you tap Finish with other phones still in the session, they stay with you instead of going home. Build the stack, and it goes to each of them; once every one has it, they all go home by themselves. The other phones, at the top of the stack screen, shows how each one is getting on. Let them go now sends them home without it.

A phone that left before the stack was built, or a stack you build again later, catches up at the next session: when a phone joins a session you host, it asks for the stacks you've built since of takes it recorded, and they arrive while you're in the lobby.

On the other phones the stack lands in Your recordings, beside their own track, with its tunes. They can play it, share it and measure its report, but not build it again, since they have only their own track. A phone keeps any stack it built itself, and doesn't take one it has no room for. To turn all this off, go to Settings › Sessions › Stacks — see Settings.